Elegir opción

173,01 $ Envío gratis en UE

Qué opinan nuestros clientes:

173,01 $ Envío gratis en UE

Agotado

¿Deseas recibir una notificación de cuando este producto de nuevo está en stock?

Todo lo que necesitas
Servicio excepcional
Envío gratis por sobre € 50

Sticky Brick Runt Especificaciones

  • Marca: Sticky Brick
  • Heating technique: Full convection
  • Apagado automático: No
  • Portátil / Sobremesa: Portátil
  • Compatibilidad: Hierbas (flores)
  • Método de uso: Tubo

Sticky Brick Runt

The Sticky Brick Runt is another flame-powered winner from Sticky Brick Labs. The concept remains the same: a prime wood body holding high-quality glass for the creation of hard-hitting vapor.

The Runt is slightly smaller than the OG Brick and has the same three brick built. But the Runt features one important difference: the slider that connects both halves of the wooden unit make it easier to assemble and gives the whole construction more stability.

Also introduced with the Runt is the restrictor disc. This metal disc reduces the chances of combustion and enables you to use bigger flames. The restrictor disc should be placed under the flame intake. The Runt ships with a restrictor disc in place, which you also can remove.

This is a Sticky Brick vaporizer that is easy to handle with the long Pyrex mouthpiece providing you with a comfortable position to take that tasty hit.

As with all Sticky Brick models the Runt is handmade in the U.S. from the best wood available. This is artisanal vaping at its best!

Sticky Brick Runt dimensions

  • Wooden body: 7.7 x 7.7 cm
  • Total height with mouthpiece: 15 cm

How to use the Sticky Brick Runt?

  1. Remove the intake brick to expose the chamber
  2. Load material into the chamber
  3. Reassemble the bricks
  4. Adjust the heat intake and mouthpiece to the preferred position
  5. Aim the torch flame into the heat intake with the outer flame hitting just the inside of the glass
  6. Cover the carb hole (the lower opening on the side) and draw slowly
  7. After you finish drawing open the carb and remove the torch
  8. Stir material between draws if needed

 Tips & tricks

  • When using the restrictor you may need to increase the flame size
  • Use the included carb cork to close off the carb and free a hand for operation
  • Do not cover the air intake (the upper opening on the side). It provides continuous airflow that is needed for operation
  • The glass heat intake is hot, do not touch immediately after use
  • You can connect the Sticky Brick Runt to a 14.4 mm glass tool with the U Joint Water Pipe Adapter

Sticky Brick Runt maintenance

The body of the Sticky Brick Runt is made of prime wood which needs occasional cleaning to keep its natural beauty. Gently clean the wood components with a cotton swab and warm water. Let it dry. Never use ISO alcohol. Condition with Sticky Brick butter.

Glass components and screens should be removed from the unit and cleaned with ISO alcohol.

When reassembling the Brick insert the O-rings first to create a better seal.

What’s in the box

  • Sticky Brick Runt vaporizer
  • Torch lighter (ships empty)
  • 2 carb corks
  • 2 stainless stir sticks
  • 2 wooden sticks
  • 6 screens
  • 2 restrictor discs

Sticky Brick Runt reseñas de clientes

Aún no hay comentarios. Deja que la gente sepa lo que piensas de este producto.

publica reseña / comenta

Sticky Brick Runt Preguntas

Aún no hemos recibido preguntas. No dudes en preguntar acerca de este producto.

hace una pregunta
Verificación de edad

Para acceder al website de VapoShop debes tener por lo menos 18 años.